Mokan Riders Offroad Club

03 KTM 200 for sale

678ktm — Thu, 29 Jul 2010 04:12:56 GMT

I am looking to sell my KTM 200 for $2500 I am selling it because i want to get a 450f not in a huge hurry to sell it so dont ask if I will sell it for less. It runs great i am the second owner of it guy before hardly rode it and kept it very clean. I have raced it in a handful of harescrambles but other than that just trail ridden. I have a ktm fmf silencer on it now but have the origanal ktm spark rester still also have the original front plate with head light and also the original rear ...

New Polaris Ranger Ambulance :-)

Administrator — Thu, 22 Jul 2010 15:55:23 GMT

My work just got this in yesterday, its a Polaris Ranger 800cc 6x6 ambulance. Its the standard Polaris Ranger with a beefed up frame, generator, AC / HEAT, lighting, medical hookups, and all kinds of other goodies lol. One of the responsibilities with my "new job" as a trainer on ambulance is to train all personnel on this thing, so I should get plenty of time driving it It looks pretty plain now, within a week or two it will have full decals to look like our ambulances, ...

Rode Perry lake 5/09

seadog37 — Mon, 10 May 2010 06:10:39 GMT

Rode Perry today with my son and had a great day.Just a note if you are going in on the turnpike take exit 197 turn right and the road will tee go left stay there it will turn into rd 1029, at the tee with the school go left. At the gas station a mile or so up go right take it to damn store then take left and you will see sign to go left at atv area. You can get off at exit 204 when it opens but will take you longer. Exit 202 go to stop light take right at stop sign go right its Iowa street ...

Can anyone tell me where the fuel air screw is on a 06 yzf 450?

Mikey Mike — Tue, 27 Jul 2010 04:39:14 GMT

I can't believe i can't find it.......

Wyoming Great area for Riding

madgreen — Tue, 27 Jul 2010 15:09:02 GMT

We just came back from a vacation in Wyoming. On the East side of Wyoming right off I-80 about 14 miles east of Laramie is Medicine Bow National Forest. We were at the Vedauwoo area of Pole Mountain Range. This is some fantastic riding for dirt bike or atv. We were there only 2 days, but plan to go back next year. You can disperse camp for free ( no electric etc) just off of any road, and unload and have miles and miles of riding area. You can call Medicine Bow Forest ranger area and request ...

Well

jjodsteer — Wed, 14 Jul 2010 14:57:10 GMT

Today I have a job interview with a company I been following........so hope they see and feel they need my talents and hire me, wanting to go ridng this weekend, will have to see how that plays out, then dropping off my enclosed on the 21st to have a A/C unit installed and also have the power vent installed, already picked up 2 nice xxxl folding cots, plus 2 lock down bars for a third to sleep, also installed a radio and gel battery, so she ready to start camping in.....then the 23rd is the ...

Just saw a posting for

jjodsteer — Wed, 21 Jul 2010 00:36:22 GMT

An ATV pull in Ridgeway, MO just north on 35 hwy past bethany...........has a # for more infor about it 66O-868-O8O4 ............I am thinking about entering, just not sure yet, lol. Sounds like fun

chris has his driving permit!!!!!!!!!!!!!!!!!

Queen 700 — Mon, 19 Jul 2010 17:38:36 GMT

chris just got his drivers permit YAY not!!!!!!!!!!!!!!! a friend of ours is teaching him how to drive,so far hes doing pretty good but likes to ride the curb like i used too.im so proud of him but dont like the idea of him growing up so fast,hes already bugging me to drive my car and his dads truck,we told him they are off limits even after he gets his lisence. its xanax time for me everytime he goes out driving lol

Got some "GOOD NEWS"

jjodsteer — Fri, 16 Jul 2010 22:45:40 GMT

I got a job finally......yeaaaaaaaaa. been laid off for just over a year, been kind of a blessing in a way, my dad had several strokes, finally had to put him in a care facility in Gower, MO, Mom had back surgery, went and cooked and help took care of her till she got back on her feet, got to do alot of atv riding, went to Disney, OK with Brian, so hope to get to go back again, but warmer times, bought another quad for my daughter, a sweet enclosed trailer, put an A/C unit on it got a couple ...

Does anyone know what the best brand of coolant is to run in my Kawasaki KFX-400

SuzukiRider — Wed, 21 Jul 2010 03:30:05 GMT

I have water in it right now and it heats up really hot even with the fan running. I have heard of engine ice, but never had an atv with a rad. Thanks for any info!

Drag Races Grain Valley

Banshee Rick — Wed, 14 Jul 2010 23:58:51 GMT

OK guys lets try this again, drag races sat. the 17th at Grain Valley, time trails at 3:00, races start at 7:00 pm, if the rain gods so see it.

Wrecked 1999 Dodge Ram 1500

SuzukiRider — Thu, 08 Jul 2010 03:57:37 GMT

My dad and I were coming home from mowing on monday 7-5-10, when it was just starting to rain and I was driving the truck, pulling the trailer. I was close to TMC on Colbern road. I started to brake when I saw the light switch from green to yellow. The truck started to slide with the trailers weight pushing and I was going about 35 mph, I slid into the intersection and t-boned another truck. I hit him between the gas tank and the cab. The drive shaft of his truck broke in half and was laying ...

Jetting for colorado?

678ktm — Sun, 11 Jul 2010 17:17:03 GMT

I am heading out to colorado to taylor park in a couple weeks anybody have any insite on jetting or anything else i should be aware of please let me know. Also if anyone is interested let me know we are going the 20th through the 25th

Thanks Ryan

Rampart Range Vid - Colorado

BikeJunkie — Tue, 13 Jul 2010 00:59:14 GMT

Helmet cam vid i put togehter of the Rampart Range riding area just southwest of Denver. It's where all the Denver locals go ride on the weekends, only about 30 min outside of town. We had a blast out there and met a few local guys to show us around for the afternoon. I was blown away by how nice everyone was out there and they all came up to talk when they noticed the KS plates. Made us feel really welcome. and don't forget the out of state permit for $25, that keeps the rangers warm and ...

Trails and Motorcross Tracks Near the Lakeside speedway

SuzukiRider — Sat, 05 Jun 2010 19:36:33 GMT

Just saw an add on craigslist and thought I would ask if anyone has ever rode here or planning to. Private riding area, Tired of driving 2 hours for a good riding area? Date: 2010-06-05, 1:45AM I have 2 motocross tracks, one is supercross style( very technical) 50acres of trails. $10 doller entry fee. Gate opens at 8am saturday and noon sunday. Take 435 to wolcott exit, follow the red arrows, Its less then 2 miles off I435. We look foward to seeing you there! Call/text 913 406 6753 ...

A Few Pics

BikeJunkie — Fri, 09 Jul 2010 03:19:07 GMT

Colorado pics... Thunder Valley, Round 6 of the AMA Pro Motocross Nationals [ url=http://www.servimg.com/image_preview.php?i=74&u=13853304][/url] Jeff Emig former mx champ and KC native talking to Ryan Dungey's mechanic [ url=http://www.servimg.com/image_preview.php?i=76&u=13853304][/url] Rampart Range Red Cone Peak Woodland Park Area Pikes Peak in the background

Would You Rather ( funny Poll )

Administrator — Thu, 08 Jul 2010 14:19:35 GMT

Would You Rather, thought this would be a funny one, just pick one and we will post new ones every few days for fun.

You dont have to over complicate or over think it, just a simple preference question.

Colorado Footage June 2010

BikeJunkie — Tue, 06 Jul 2010 05:11:22 GMT

Helmet Cam vid I made of our ride up the Red Cone Summit Trail in Colorado at the end of June. It was tough as hell but the scenery was insane!!

have a good and safe Independence weekend!

Shyray2006 — Sat, 03 Jul 2010 14:17:42 GMT

Hope everyone has a great weekend...stay safe!!

does anyone know the stock jet settings for a 07 ktm sxf 450

Mikey Mike — Mon, 28 Jun 2010 22:19:20 GMT

I just bought a ktm sxf 450 and the person took off his fmf exhaust and I need to find out the stock jetting for the bike. Any help would be appreciated. Thanks.

Rode Finger lakes 6-21 to 6-27

seadog37 — Tue, 29 Jun 2010 09:35:27 GMT

I think I have figured out why people only go to finger lakes for a weekend. I went with 4 running atvs and came home with one that will run. Busted a spindle off on one. luckily was just turning around when it came off. Riding for 6 days straight takes a toll on the atvs. Hopefully I can get them back going to go back in August. I had the best time of my life riding all week. I almost got my 4 wheel drive stuck but backed up and gave it different look and got through. Wenched m y son out of ...

Tearjerker Warning

Mel — Tue, 29 Jun 2010 14:13:47 GMT

My family have always believed that animals have souls and feel real love and sorrow. This is amazing, but I'll warn you, it's graphic: cat tries to save friend Hope everyone is doing well. Hug your furry kids! Mel

New Kawasaki KFX-400

SuzukiRider — Mon, 14 Jun 2010 23:39:33 GMT

I just bought a 2007 Kawasaki KFX-400. It runs perfect. The previous owner painted it and it is chipping off. I was wondering if anyone on here has ever painted the plastics on theirs and what they used. Thanks!

Kawasaki KFX-400 Radiator Fan Problem

SuzukiRider — Wed, 16 Jun 2010 05:34:52 GMT

I just bought a 2007 Kawasaki KFX-400. It runs great, but while im riding today I felt that the engine is really hot. The radiator fan is not working. I was wondering if anyone knows anybody with a used one that I could buy or an atv salvage yard. I already took the fan off my atv. Thanks!

worked great

mudryder_68 — Sun, 27 Jun 2010 05:10:13 GMT

i need to brag, a while back i bought a tire plug and inflater kit from walmart. it comes with two co2 cartridges a little inflater valve and five tire plugs and tools and some patches. today my nephue nocked the beed off a rear tire. i broke the kit and it aired the tire back up instantly. later he got a thorn in a tire, out comes the kit, i plugged the tire and still had enough co2 the the first cartridge to finish airing the tire back up. the kit is small and fitts in the tool box. if ...

rode deep water 6 26 10

mudryder_68 — Sun, 27 Jun 2010 04:57:30 GMT

we went to deepwater today. had a blast. the park its self was pretty dry, there was mud if you wanted to. you could easly get around anything you didnt want to try.
the lake was up 14 feet so getting down to the beach areas was out.infact most of the east end was gone. just wish it wasnt so hot. we where cooking in the open spots but wasnt to bad riding threw the trees.

Guess who's coming to (as) dinner.

Banshee Rick — Sun, 20 Jun 2010 15:15:59 GMT

At the feeder last nite.

The wife took these pics yesterday evening, in the back yard.

PERRY LAKE STATUS WEB SITE

bryan — Mon, 14 Jun 2010 17:39:35 GMT

Good Afternoon MOKAN.........The following link will show whether or not the ATV riding area is open or closed.

Please check this before you leave for Perry Lake!

http://www.nwk.usace.army.mil/pe/daily.cfm

Thanks,

Bryan

kinda cool

Shyray2006 — Fri, 18 Jun 2010 03:27:31 GMT

have some new people here or coming soon...they participated in the relay for life and I walked a long time and apparently drew some attention ahaha so people saw my shirt!! YAY MOKAN RIDERS OFFROAD CLUB haha i did change clothes 3 times too haha so i wore it later in the evening but today at work a lady was telling me how she appreciates everything i do for the community and then asked what mokan was and i told her and she was excited because she said they all ride but just on their land and ...

Finger Lakes Memorial Weekend 2010

Lamps3 — Fri, 04 Jun 2010 21:54:39 GMT

Well all it had been 23 years since I had been there, but they have some funny, weird, stupid rules. One of them is that you can not ride your atv to the shower house to do your bodily functions. Pain in the neck to go and get into the truck just to do that. Not Cool! Our campsite was to far away to walk. So come dark of course we went behind the tree. The other thing that was not real Cool was that you could not go fishing from 10pm to 4am. This is the time I had planned on fishing. ...

Dyno- 450 on the Little Sahara Dyno

cruzltz400 — Mon, 24 May 2010 20:45:50 GMT

I went ahead and put the 450 on the dyno while at little sahara this last weekend. First pull dyno'd at 46 horsepower, after a little tweaking with the jets it dyno'd at 49.9

Any rekluse experts??

curado — Sun, 13 Jun 2010 17:31:36 GMT

My bike has one. I didn't install it and I've never worked on one. It is not fully disengaging anymore and I can't tell why.

I was expecting to see grooves in the clutch basket but it doesn't look like there are any. I am afraid to take this thing apart though .. looks like 300 bb's are ready to fall out if I do lol. I have no manual for the thing that I can find.

Streched banshee project

top1banshee — Sat, 24 Apr 2010 14:55:10 GMT

Well I started a new build Its a 04 banshee going to be streched out 18 inches in the front and 6 in the back heres a few pics Its gonna have a 00 750 gsxr motor going on it

Hillclimbing Anyware

Lamps3 — Sat, 22 May 2010 15:57:19 GMT

Hey all I nominate Curado as the narliest hill climber. He is not afraid of any hill. I have more than once seen him eat it while trying to get to the top of a hill.

Rickey

Enclosed Trailer

jjodsteer — Tue, 18 May 2010 19:51:10 GMT

Anyone any good about getting one wired.....1st wire job would be wiring a 12v maxx power air and a car stero to a 12v battery, that will be charged up when plugged in to the truck trailer plug. 2nd wiring job would be to install a out side plug (to be plugged in to a camp site) then go from there to a small breaker box, from the breaker box to a future ac unit, another from the box would go to 4 diff. plug in outlets, a third wire from the box would go to a light switch then to a couple lights ...

QUOTE OF THE DAY!

bryan — Sat, 27 Mar 2010 11:56:08 GMT

Wisdom begins in wonder.

The farm in St. Joe

seadog37 — Tue, 25 May 2010 09:26:11 GMT

Got email from David that the farm is still open and the rates are same as last year. For area guys its in the bluffs up around Bluff woods state forest. I'm ready to ride.

Pictures - Easter Sunday at HW65 MX

curado — Wed, 07 Apr 2010 00:51:09 GMT

Rickey, Reggie and I were there on April 4th to help organize the rodeo that was supposed to start at 3:00. We were watching bikes and ATV's practice all morning and I had lots of time to take pics.

http://picasaweb.google.com/pontiacracecar/HW65MXEasterSunday#

riding area map update

madgreen — Fri, 16 Apr 2010 17:49:37 GMT

Can you please send me an update?

thanks

madgreen@fairpoint.net

Bryan's wife - Surgery Update

bryan — Sat, 05 Jun 2010 01:49:50 GMT

Well, I wanted to say thank you all for your prayers. My wife (Dee Dee) had surgery today to have a cist removed that they thought may be cancer do to some of the test results from previous doctor visits. They did run into quite a bit of scar tissue from her previous operations. However, they did not find any cancer. Thank you God! We checked her in at about 11:40 AM this morning. The surgery lasted right at 2 hours and then she was in the recovery room for another 2 hours. They rolled ...

posting this for grissom..check it out asap!!

Shyray2006 — Thu, 10 Jun 2010 14:43:04 GMT

[b]Photo Shoot to benefit Ride for Ryan and all proceeds for scholarships to help students that have Construction Related careers.[/b] [b]Tickets are $10.00 a sitting (no limit on # in a sitting)One Sitting per FamilyYou can bring your own BIKE....You will get 10x13 Color Enhanced Picture for your donation.[/b] [b]Tickets have to be purchased in Advanced to schedule your sitting.You can stop by Evil Twin Cylcles to purchase ticket or contact Kristina at 816-617-9344 ...

Melissa New Surgery Same Shoulder

Lamps3 — Wed, 02 Jun 2010 22:37:43 GMT

Thought all would want to know. I heard from Melissa a little while ago that she will be scheduled for another surgery very soon. 3 hour operation this time. Then another 12 weeks off of work. I do not know how we are going to make it, finacially that is!! Do some praying for us we are going to need it.

Rickey

mokan supports relay for life 2010

Shyray2006 — Sun, 30 May 2010 17:53:09 GMT

In less than a week I will be walking from 6pm to 6am not sure how long i am going to last but i hope i can make the most laps and raise some money too! Its friday but you can still support me if you would like. I hope Geoff walks some too and my son of course will do the first few laps with me but all in all its for a GREAT CAUSE!! If you have had cancer and beat it or currently fighting let me know so i can write your name on my MOKAN RIDERS OFFROAD CLUB Supports Relay for life ...

816rider pic and videos

chrisgyfz450 — Thu, 03 Jun 2010 01:06:18 GMT

THANK YOU LUCAS FOR THE RIDE

Ride Spot Map.

geteminline — Fri, 20 Nov 2009 04:40:41 GMT

This was an idea I brought up with the leader of the pack PM me and I can add you to the list and the name. Its basically a list of spots we know of to ride at and directions and info on the spot. basically a private trails source. if the land is private specify this in your post. Explain the land and who's it is. this is a private map so ask the person who posts the spot if you can ride there if it is there land. If the rules of this need to be revamped please tell ...

Leather Working

Lamps3 — Sat, 22 May 2010 16:14:52 GMT

I have been out of it for a while but come this winter I do plan on getting back into making leather items. Belts, wallets, coin purses ..... etc. Is there anything someon might be interested in me making for them?

Rickey

Best Drag Racing Picture

Administrator — Mon, 19 Apr 2010 10:47:09 GMT

Figured this was an appropriate one since we have so many members really getting into drag racing and we have our buddy Rick who luvvvvvvvvvvvvvs to throw a good roost and see how quick he can get from point A to point B ;-)

Well lets see them, fast and roosting, just like we like them lol

hood question

Ruizracing — Tue, 01 Jun 2010 03:24:55 GMT

I just purchased a 91 Ford F250 4x4 and I want to be able to mount a fiberglass hood scoop to a steel hood since a new hood with scoop would run me about 530$. The problem is I'm haveing a rough time trying to decide which way to go. The first way is to rivet it on then go over with fiberglass or bondo but I'm worrried that later on it will crack or warp from heat and stress. The other way I was told is use a epoxy then fiber glass or bondo to fill in the seams and gaps and I'm worried I would ...

Happy Memorial Day!

Mel — Fri, 28 May 2010 03:54:05 GMT

Just a quick note to say I hope everyone has a wonderful, safe Memorial Day weekend! Hope this weekend lets you: Welcome Summertime Enjoy some time with Family :

Winner!! you choose

geteminline — Wed, 19 May 2010 19:33:00 GMT

got this from another forum. Please answer this... If you walked in a room full of bikes and the man behind the counter says to you "congrats you are our the 100,000 customer so you win" The room is filled with Harleys, Hondas, Yamahas, Suzukis, BMWs, Kawis and Ducatis. Winner rules. Pick out any bike you want. It won't cost you a single dime. You can't give it away or donate it. You must only ride this winning bike as your own. Can't sell it. Which bike ...